Yorkville E2152/B (조)
판매가격 : 10,650,000
적립금 :0
제조사 :Yorkville
구매수량 :

제품특징

SR 최고의 기술. 엘리트 시리즈 스피커 시스템   
80년대 이후로 엘리트 시리즈 스피커는 소형 고출력 스피커의 혁신적 모델 M160을 시작으로 풀 레인지 시리즈, 스테이지 모니터 그리고    
서브우퍼에 이르는 전체의 모델을 갖추게 되었습니다.  현재의 모델 구성은 고효율의 콤팩트한 모델인 E10 (M160의 현재 모델)에서    
대출력 1500와트급 E2152에 이르는 전모델에 최신의 보호장치와 크로스오버 기술이 적용되었습니다. 몇몇 모델에는 회전이 가능한 혼    
드라이버를 사용하여 80°x50° 또는 50°x80°의 지향각으로 사용이 가능하며, 케비넷은 최고급 발틱해 자작나무 합판을 사용하여 최고의   
내구성을 자랑할 뿐 아니라, 국제표준의 플라잉 하드웨어가 장착되어 있습니다.  

élite Series
E2152 - Speaker - 1500w, 2 x 15 inch / 2 inch

This 2 x 15-inch 2-inch, 1500 watt cabinet proves that matched drivers do make a cabinet better. The design of this bi-ampable trapezoidal cabinet incorporates a 2 inch high frequency driver which has exceptional upper frequency response yet provides highly efficient mid-range output as well. The driver fires through an ultra-modern true conical radial horn, back-set to optimize time alignment with the low frequency section.

Features

The Yorkville designed 90° x 40° horn is composed of a rigid, non-resonant high-tech composite which virtually eliminates high frequency coloration. The E2152 features the ATP™ protection scheme. The electronics have also been updated to provide a firm acoustic bond between low and high frequency using phase correction filters.

Integrated flypoints mean the E2152 can be easily used in any install, touring or club rig. The E2152 is perfect for applications in medium to large sized venues, especially when used with an EP2152 processor and/or optional élite subwoofers.

E2152 - Black Ozite (Carpet) Finish
E2152B - Black Ultrathane (Painted) Finish

제품스팩

System Type

Two-Way

Active or Passive

Passive

Continuous Power(Watts)

1500

Biampable

Yes

Nominal Impedance (Ohms)

4

Sensitivity (dB @1Watt/1m)

100

Max SPL (dB)

132

Frequency Response (Hz +/- 3db)

55 - 20k

Crossover Frequency (Hz)

1500

Driver Configuration

2 x 15 inch / 1.5 inch

HF Driver(s)

1.5 inch throat (3 inch Titanium Diaphragm)

HF Horn

Composite Conical Radial

HF Dispersion (°H x °V)

90 x 40

HF Protection

ATP™

LF Driver(s)

2 x 15 inch (3 inch voicecoil)

Inputs - 1/4" Jacks

2

Inputs - Speakon 4-pin

2

Flying Hardware

3/8-inch x 9 (All Corners)

Wheels

2

Bar Handles

2 Corner, 2 Side

Enclosure Materials

15mm (5/8inch) 11-ply Russian Birch

Grille

Perforated Metal

Covering / Finish

Black Ozite (Carpet)

Optional Covering / Finishes

Black Ultrathane Paint (E2152B)

Processor (optional)

EP2152

Dimensions (DWH xbackW, inches)

19 x 26 x 45 x 18

Dimensions (DWH xbackW, cm)

48 x 66 x 115 x 28

Weight (lbs/kg)

149 / 67.6

*

Specifications subject to change without notice

élite Series Overview

The Compact & Complete Solution Yorkville’s élite series loudspeaker systems are the result of years of research, pushing the limits of modern state-of-the-art sound reinforcement technology. Engineered for the serious pro audio user, élite systems are among the most advanced, most versatile and most efficient high powered portable P.A. boxes available.

New models for a new millennium
Since the mid 80’s, the élite series has grown from the original compact M-160, into a complete line of professional enclosures including active and passive full-range cabinets, stage monitors and subwoofers.

Today’s élites, from the highly efficient two-way E10 to the 1500 watt E2152 have some of the most advanced component protection and crossover technology available today. They have been carefully designed to bring you the latest in Yorkville’s advanced loudspeaker engineering.

A new concept in loudspeaker cabinet design first seen in Yorkville’s Pulse TM352 and TM12 is perfected in the élite line. Ideal for any small PA rental house, installer or sound company, these loudspeakers may replace a number of specific application cabinets in any inventory.

Modified Trapezoidal Shape A modified trapezoidal shape and recessed input jack panel and handles mean these cabinets can function perfectly as a wedge monitor or front-of-house loudspeaker. Unlike some ‘multi-function’ loudspeakers currently in the marketplace, great care has been taken in the design process to ensure that élite cabinets will perform without compromising functionality as either a monitor or a front-of-house enclosure. Neither application was considered as an afterthought.

Several of the élite loudspeakers are loaded with 80° x 50° rotatable ABS Waveguide horn assemblies (the E10 utilizes a 100° x 25° horn). The ability to rotate the horn assembly ensures that the cabinet can provide optimum high frequency dispersion when the loudspeaker is used in either a vertical, horizontal or arrayed application.

Integrated stand mount adapters and flyware means these enclosures can be utilized in any permanent install or touring application. In addition, the modified cabinet shape means the élite series can be installed much closer to vertical surfaces and in some cases, under balconies in tight locations, and can be arrayed in a much tighter less obtrusive cluster.

Of course, the élite series has retained the features and high quality sound that have made them so popular including Yorkville's famous two year (even if you break it!) transferable warranty.*

Advanced technology

  • Compact and simple to operate
  • Linear, full range frequency response
  • Time aligned with low distortion
  • High power handling, high efficiency, high SPL
  • High efficiency, high excursion, linear response drivers.
  • High definition, high slope internal passive crossovers.
  • Computer modeled enclosure designs to accommodate greater driver dynamics.
  • Unique protection networks capable of reacting equally to power overloads and input distortion levels.
  • Dual purpose electronic processors specifically designed to enhance bass response and to act as stereo crossovers when bi-amping with subwoofers.

Advanced Crossover Networks and Protection Schemes
The majority of the élite range feature seamless driver interaction through sophisticated high-slope passive networks and ingenious component protection schemes. Rugged jackplates are inset and include a combination of both Speakon™ and 1/4" phone jack inputs.

Advanced PTC™ Horn Protection makes its debut in the élite series.
PTC™ is an ingenious current sensing / self resetting breaker that offers some serious advantages over current protection schemes used in many loudspeaker cabinets. This protection scheme, while always present in the signal path, remains inaudible until it becomes necessary for it to react. It kicks in at a point where it effectively reduces output to the horn and protects that diaphragm from damage due to excessive power input or signal distortion. Unlike a breaker it does not require a physical reset to allow signal back to the horn driver, and unlike a bulb or fuse, does not need to be replaced if the circuit is tripped, and the fuse is blown.

Where PTC™ shines is in heavy feedback environments where most horn diaphragm damage occurs. In rare situations even where a microphone might be dropped in a monitor, the sustained ‘squeal’ can destroy diaphragms in seconds. PTC™ will significantly reduce output level to the horn to protect the diaphragm. When the situation has been rectified, and the feedback eliminated the horn will return to full operating level within half a second.

The E2152 features the ATP™ (Active-Transistor) protection system, which allows the horn driver to operate at levels significantly above those required for normal operation. The ATP™ brickwall element of the protection circuit uses power transistors configured to operate linearly yet have the fast attack required to protect against harmful transients. Along with ATP™, the crossover also incorporates air core coils and polypropylene capacitors to guarantee reliable and distortion free operation at extreme levels. The sonic benefit is higher output and greater transparency when operating at high levels.

Under the hood of an E152 The L-Series uses our MSP™ (Multi-Sensing) protection system. This sophisticated and accurate protection network covers all the bases. Components are protected from excess subsonic energy, as well as short term (20ms) and long term (500ms) overpowering. This combination accurately protects against mechanical and thermal failure. In addition the high frequency driver is transparently and reliably protected by borrowing the light bulb from our CTL™ protection scheme and combining it with a relay (to further protect the light bulb). This self resetting protection scheme accurately senses clear abuse to any band, and shuts the band down until the potentially damaging situation is resolved. Bright indicator LED's (one for LF, one for MF/HF) are provided on the crossover dish to warn the user of impending / active shutdown. Along with the protection scheme, the L-Series crossover also incorporates polypropylene capacitors to guarantee reliable and distortion free operation at extreme levels. The sonic benefit is higher output and greater transparency when operating at high levels.

élite Series Characteristics

Processor Controlled
Full function stereo analog processors that are configurable for passive or bi-amp operation, as well as live or recorded music applications make sure that your élite system is always tuned and ready.

Rugged Driver Mounting System
All élite cabinets feature a specially reinforced driver mounting system that makes sure the horn drivers will still be attached to the horns when you get to the show. The ABS or composite horns are pressure fitted to the driver which is bolted to the internal driver support.

Custom Design Horns
Custom ABS plastic and composite horns are specifically designed for each cabinet and manufactured right in our factory for optimum quality control. This insures proper waveguide output for better clarity and lower distortion.

E2152 Cutaway ImageRugged Black Carpet Covering
The stylish yet practical carpet that covers the élite cabinets keeps them looking great. The two part rubberized glue that is used to attach the carpet ensures that élite cabinets will stand up against moisture by effectively wrapping the cabinet in a rubber glove.

Curved Metal Speaker Grilles
Curved metal grilles absorb shocks evenly to resist dings and dents while eliminating frequency resonance. The trapezoidal cabinet shape allows for arrayable performance without phase cancellation.

Recessed Handles
All élite cabinets feature attractively recessed bar handles. Great care is taken to make sure that they "stay out of the way", but are easy to get at when you need them.

Flush Mounted Stand Adapters
Flush-mounted stand adapters in the top of the subs and bottom of the full-range speakers allow the use of the adjustable SW-TELETUBE option which makes setup a breeze by eliminating the need for speaker stands.

Integrated Wheels
Tilt back wheels and top-mounted handles are standard issue on the larger cabinets such as the E215, E2152, LS1208 and LS1004.

350,000원
3,550,000원
3,500,000원
4,920,000원
1,020,000원
배송비 : 기본배송료는 0원 입니다. (도서,산간,오지 일부지역은 배송비가 추가될 수 있습니다)  50,000원 이상 구매시 무료배송입니다.
본 상품의 평균 배송일은 3-5일입니다.(입금 확인 후) 설치 상품의 경우 다소 늦어질수 있습니다.[배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.]
본 상품의 배송 가능일은 일 입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다. (단, 연휴 및 공휴일은 기간 계산시 제외하며 현금 주문일 경우 입금일 기준 입니다.)
상품 청약철회 가능기간은 상품 수령일로 부터 5일 이내 입니다.
상품 택(tag)제거 또는 개봉으로 상품 가치 훼손 시에는 5일 이내라도 교환 및 반품이 불가능합니다.
저단가 상품, 일부 특가 상품은 고객 변심에 의한 교환, 반품은 고객께서 배송비를 부담하셔야 합니다(제품의 하자,배송오류는 제외)
일부 상품은 신모델 출시, 부품가격 변동 등 제조사 사정으로 가격이 변동될 수 있습니다.
신발의 경우, 실외에서 착화하였거나 사용흔적이 있는 경우에는 교환/반품 기간내라도 교환 및 반품이 불가능 합니다.
수제화 중 개별 주문제작상품(굽높이,발볼,사이즈 변경)의 경우에는 제작완료, 인수 후에는 교환/반품기간내라도 교환 및 반품이 불가능 합니다.
수입,명품 제품의 경우, 제품 및 본 상품의 박스 훼손, 분실 등으로 인한 상품 가치 훼손 시 교환 및 반품이 불가능 하오니, 양해 바랍니다.
일부 특가 상품의 경우, 인수 후에는 제품 하자나 오배송의 경우를 제외한 고객님의 단순변심에 의한 교환, 반품이 불가능할 수 있사오니, 각 상품의 상품상세정보를 꼭 참조하십시오.

주소 : 전북 전주시 덕진구 진북동 320-28 | 사업자등록번호 : 402-34-92768
통신판매업신고번호 : 덕진 2007-166 | 개인정보관리자 : | 대표 : 김종성 | 상호명 : 인성미디어
전화번호 : 063-254-4984, 010-9885-4984 | 팩스번호 : 063-254-4986 | 메일 : insungmedia@naver.com
Copyright ⓒ www.insung21.co.kr All right reserved